Need a new toilet installed in Mount Waverley? Sedcon Plumbing is VBA-licensed and covers Mount Waverley from Bentleigh. Straightforward changeovers are usually a single visit.
Mount Waverley is dominated by 1960s and 70s brick family homes, and a great many still have their original bathroom. Those older suites tend to be single-flush and water-hungry, so a changeover here is often as much about the water bill as it is about the look.
Toilet replacement and changeover in Mount Waverley
Most of our Mount Waverley work is a straight changeover — the old suite out, a new one in, usually the same day. We remove and dispose of the old toilet and leave the bathroom clean.
What we install
Close-coupled — the standard cistern-on-pan suite and the most common changeover in Mount Waverley.
Back-to-wall — the pan sits flush to the wall, hiding the pipework and easier to clean around.
Wall-hung with in-wall cistern — best look and easiest to clean under, but it needs a compatible wall and takes longer.
Smart and bidet suites — these need a power point within reach and sometimes a dedicated water connection.
What affects the price
The biggest factor is the set-out — the distance from the finished wall to the centre of the waste outlet. If the new suite’s set-out does not match the old one, the waste has to be adapted or moved. That is the most common cause of an unexpected extra on a changeover.
Also relevant: concrete floors, in-wall cistern work that opens up a wall, corroded stop taps, and upper-level access. If any of it turns up we tell you before we do it, not on the invoice.
Water efficiency
Every suite sold in Australia carries a WELS star rating. A 4-star dual flush uses about 4.5 litres on a full flush and 3 on a half, against roughly 11 litres for a pre-1990s single flush.
Compliance in Victoria
Replacing a toilet is regulated plumbing work. It must be done by a licensed or registered plumber, and for work over $750 you are entitled to a Compliance Certificate — proof the work meets the Plumbing Regulations, and something you will want if you sell or claim on insurance.
Sedcon is VBA-licensed (Licence 120392) and covered by public liability insurance.
Frequently asked questions
Will a new dual-flush actually save much in a Mount Waverley family home?
On a busy household, yes. A pre-1990s single flush uses roughly 11 litres a flush against about 4.5 for a 4-star dual flush full flush. Across a family of four that adds up over a year.
Do I need a licensed plumber to replace a toilet in Victoria?
Yes. Toilet installation is regulated plumbing work and must be carried out by a licensed or registered plumber. For work over $750 you should also receive a Compliance Certificate.
Can you replace a toilet in one visit?
In most cases, yes. A like-for-like changeover where the new suite matches the existing set-out is almost always a single visit.
Can you supply the toilet, or should I buy it?
Either. We can supply a quality WELS-rated suite, or install one you have bought. If you are buying, check the set-out matches your existing waste position.
What is a set-out and why does it matter?
The set-out is the distance from the finished wall to the centre of the waste outlet. If the new suite does not match the old one, the waste has to be adapted or moved. It is the single biggest driver of extra cost.
Book a toilet changeover in Mount Waverley
Call or text 0413 647 557. Tell us what you have got and what you want, and we will give you a price.
See our Toilet Installation Melbourne page for the full service. We also cover Glen Waverley, Chadstone, Oakleigh and Clayton.
Learn more about our Toilet Installation Melbourne service, or see all suburbs we cover across greater Melbourne.
Nearby suburbs we cover
We also provide toilet installation in the suburbs next door: